Thank you for purchasing our 120 bottle Mega Wine Cube. You will find the assembly of the Wine Cube is extremely simple and will take just a few minutes. You will need philips head screw driver and a flat head screwdriver.

(1) Remove the contents of the shipping box. There should be 4 sides (two with holes drilled in the side and two with two holes drilled through the end), two long boards with 3 notches, 4 boards with angled ends with 1 notch and 8 furniture grade fasteners.
(2) Align the 4 sides and loosely attach them with the fasteners so they form a square.
(3) Place the 2 long boards into the center of the 4 sides forming an "x". Connect them together using the center notches.
(4) Now connect the smaller boards to the center boards using the notches. Make sure that the angle of the ends of the small boards are parallel to the sides.
(5) Once the boards are in position within the sides tighten the fasteners.

You are now finished. Enjoy!

If you have any questions call us at 1-866-676-4028